Mapa Nitrile Ultranitril 492 Glove (X X Large)

Instructions for use

• It is recommended to check that the gloves are suitable for the intended use, because

  the conditions of use at workplace may differ from the "CE"-type tests.

• Persons sensitised to dithiocarbamates and thiazoles should not use these gloves.

• Put the gloves on dry, clean hands.

• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time.  in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.

• Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.

• Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from light, humidity and heat.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

• in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
• in use with a solvent (diluents, etc...) : rub over with a dry cloth
• in use with acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth

Caution : improper use of the gloves or submitting them to any cleaning or laundering process which is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

• This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.

• This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH)

  Applications

• Automotive/mechanical industry
  • Treating/degreasing metals with solvents
  • Machining parts using cutting oil
• Local Authorities (Cleaning)
  • Handling aggressive chemical products
• Construction Industry (Carpenters/Joiners)
  • Handling Pvc based glues
  • Preparing coatings, varnishes
• Construction Industry (Masons / Plasterers)
  • Handling oils, solvents, detergents
• Local Authorities (Parks and Public Spaces)
  • Plant Treatment Products
    
    Category 3 classification
    Specific Chemical Protection & Micro-organisms Protection to EN 374
    Puncture/Tear/Cut Resistant to EN 388
    
    Size Guide Small 6 - Medium 7 - Large 8 - X Large 9 - Large 10 - XX Large XXX 11 
    
    Pack 10 Gloves - XX  Large