Mapa Nitrile Stansolv AK 22 381 Glove (X Large)

Specific features

Unique separate liner and shell construction provides liquidproof protection

Size Guide Small 6 - Medium 7 - Large 8 - X Large 9 - Large 10 - XX Large XXX 11 

Instructions for use

• It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at the workplace may differ from the "CE"-type tests.
• It is not recommended for persons sensitized to dithiocarbamates and thiazoles to use these gloves.
• Put the gloves on dry, clean hands.
• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
• Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
• Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their packaging protected from light and humidity.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

• in use with paints, pigments and inks: wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
• in use with a solvent (diluents, etc…): rub over with a dry cloth
• in use with acids or alkalies: thoroughly rinse the gloves under running water, and rub over with a dry cloth.

Caution : improper use of the gloves or submitting them to a cleaning or laundering process that is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

• This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.

• This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).